Omnitronic Pick-up system S-15 Specifications download pdf (Page 2)

INSTALLATION INSTRUCTIONS

S-15

Pick-up-system

USAGE

This pick-up-system is recommended for OMNITRONIC BD-1550, DD-2220, DD-2250, DD-4220, DD-4250

DELIVERY

The delivery includes the pick-up-system with stylus cover, 2 fixation screws, 2 nuts and 2 washers.

INSTALLING/EXCHANGING THE PICK-UP SYSTEM

If you are exchanging the system, loosen the tightening screws on the headshell and remove the connection-

cables of the pick-up system. Remove the old pick-up system from the Headshell.

Put the stylus cover on the stylus.

Connect the Headshell's connection cables with the terminals of the pickup-system and make sure that the

occupation of the cables is correct.

The different colours mean:

Pin-No.: Used colour: Channel and poles:

1 White (L+) Left, plus-pole

2 Blue (L-) Left, minus-pole

3 Red (R+) Right, plus-pole

4 Green (L-) Right, minus-pole

After connecting the connection cables fix the system with the

enclosed screws under the Headshell.

Balance the tone-arm and adjust the stylus pressure/Anti-Skating

(recommended stylus pressure 2.5 g )

TECHNICAL SPECIFICATIONS

Weight: 5 g

Frequency response: 20 - 20,000 Hz

Recommended tracking force: 30 mN

Output voltage: 5 mV

Terminal resistance: 47 kOhm

1 2

No comments

Omnitronic Pick-up system S-15 Specifications Page 2