Omnitronic XO-23 Active crossover User Manual download pdf (Page 24)

10355625_V_1_0.DOC

24/35

CLEANING AND MAINTENANCE

Disconnectfrommainsbeforestartingmaintenanceoperation!

DANGERTOLIFE!

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use

alcohol or solvents!

There are no servicable parts inside the device except for the fuse. Maintenance and service operations are

only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Please note: This fuse is being used for both 115 V and 230 V.

Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.

Step 2: Remove the old fuse from the fuseholder.

Step 3: Install the new fuse in the fuseholder.

Step 4: Replace the fuseholder in the housing.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply

cable available at your dealer.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply: 230 V AC, 50 Hz ~

Power consumption: 10 W

Fuse: T 0.5 A

Slope: 24 dB / octave

Operation-modes: 2-way-stereo or 3-way-mono

Input: Mono/stereo

Input impedance: 10/20 kOhms (unb./bal.)

Output: Mono/stereo

Output impedance: 300/150 kOhms (unb./bal.)

In/Out connectors: XLR

S/N-ratio: >100 dB

Xover frequency range: 45 Hz - 9 kHz

THD: 0.05%

Crosstalk: >80 dB, -3 dB

Input gain:

-∞ to +6 dB

Output gain:

-∞ to +12 dB

Low Cut: 30 Hz

Phase adjustment: 0-180°

Dimensions (WxDxH): 483 x 147 x 46 mm

Weight: 2 kg

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

Comments to this Manuals

No comments

Omnitronic XO-23 Active crossover User Manual Page 24

Comments to this Manuals

Related products and manuals for Audio mixers Omnitronic XO-23 Active crossover