Omnitronic XO-23S Active crossover User Manual download pdf (Page 15)

10355630_V_1_0.DOC

15/28

running, the device must be checked by a specialist if the liquid has reduced any insulation. Reduced

insulation can cause mortal electrical shock.

There must never be any objects entering into the device. This is especially valid for metal parts. If any metal

parts like staples or coarse metal chips enter into the device, the device must be taken out of operation and

disconnected immediately. Malfunction or short-circuits caused by metal parts may cause mortal injuries.

Before the device is switched on all faders and volume controls have to be set to "0" or "min" position.

CAUTION: Turn the amplifier on last and off first!

Please note that damages caused by manual modifications on the device or unauthorized operation by

unqualified persons are not subject to warranty.

Keep away children and amateurs!

HEALTH HAZARD!

By operating an amplifying system, you can produce excessive sound pressure levels that may

lead to permanent hearing loss.

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried

out by authorized dealers.

OPERATING DETERMINATIONS

This device is a professional crossover. This product is allowed to be operated with an alternating current of

230 V, 50 Hz and was designed for indoor use only.

Do not shake the device. Avoid brute force when installing or operating the device.

When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,

moisture or dust. There should not be any cables lying around. You endanger your own and the safety of

others!

Do not operate the device in extremely hot (more than 35° C) or extremely cold (less than 5° C)

surroundings. Keep away from direct insulation (particularly in cars) and heaters.

Operate the device only after having familiarized with its functions. Do not permit operation by persons not

qualified for operating the device. Most damages are the result of unprofessional operation!

Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.

Please use the original packaging if the device is to be transported.

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

Never remove the serial barcode from the device as this would make the guarantee void.

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-

circuit, burns, electric shock, etc.

DESCRIPTION

The OMNITRONIC crossover is designed for professional application. With an active crossover, you can

separate the output signal of your mixer in different frequency ranges. In this way you can define which

signal portion will go to which amplifier.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

No comments

Omnitronic XO-23S Active crossover User Manual Page 15