Omnitronic XO-23S Active crossover User Manual download pdf (Page 20)

10355630_V_1_0.DOC

20/28

CLEANING AND MAINTENANCE

Disconnectfrommainsbeforestartingmaintenanceoperation!

DANGERTOLIFE!

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use

alcohol or solvents!

There are no servicable parts inside the device except for the fuse. Maintenance and service operations are

only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.

Step 2: Remove the old fuse from the fuseholder.

Step 3: Install the new fuse in the fuseholder.

Step 4: Replace the fuseholder in the housing.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply

cable available at your dealer.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply: 230 V AC, 50 Hz ~

Power consumption: 10 W

Fuse: T 0.5 A

Slope: 24 dB / octave

Operation-modes: 2-way-stereo/mono

Input: Mono/stereo

Input impedance: 10/20 kOhms (unb./bal.)

Output: Mono/stereo

Output impedance: 300/150 kOhms (unb./bal.)

In/Out connectors: XLR

S/N-ratio: >100 dB

Low/High xover frequency range: 100 - 7 kHz

Subwoofer xover frequency range: 50 - 350 Hz

THD: 0.05%

Input gain:

-∞ to +6 dB

Ouptut gain:

-∞ to +12 dB

Low Cut: 30 Hz

Phase adjustment: 0-180°

Dimensions (WxDxH): 483 x 147 x 46 mm

Weight: 2 kg

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Omnitronic XO-23S Active crossover User Manual Page 20

Comments to this Manuals

Related products and manuals for Audio mixers Omnitronic XO-23S Active crossover